Accessories for High Performance Tactile Switches

23 products found

NEW 10G MEC

Ø11.5mm concave cap for Ultramec 6C

The 10G cap was designed with low profile 6C switch in mind. It has the lowest total height in MEC product range.

Navimec/ 1ZCS+1ZB MEC

Five piece navigation solution

Navimec is a five position switch solution ideal for data entry devices where joystick function is needed. It has a select switch in the middle and four navigational switches around it. The solution is available as a module as well as single parts for own PCB mounting. Illuminated version is also possible.

Controlmec/ 1ZW MEC

Panel sealed five-piece navigation solution

1ZW is Contolmec with panel sealing. Controlmec is a five position integrated switch solution designed for outdoor, dusty and humid applications, to control a unit, navigate in a display or operate auxiliary equipment. The solution is based on the Multimec 5 series.

Controlmec/ 1Z MEC

Five-piece navigation solution

1Z is Controlmec without panel sealing. Controlmec is a five position integrated switch solution to control a unit, navigate in a display or operate auxiliary equipment. The solution is based on the Multimec 5 series switches.

Foilmec/ 1YS MEC

illuminated square cap for foil overlay

1YS is a cap especially designed for foil overlay. It can be fully illuminated and has a SMD option with the Multimec 5E switch.

1GAS/1GCS MEC

Flat round caps for foil overlay

1GAS/1GCS caps are flat round caps designed for foil overlay. 1GA is Ø11mm and 1GC is Ø15mm.

1KS/1KBS/1KCS MEC

Square caps with extra tactile feel

1KS/1KBS/1KCS are square caps with excellent illumination possibility. 1KS has a flat top, 1KBS a concave top and 1KCS a convex top.

1SS/1LS/1IS MEC

Small round cap

1SS/1LS/1IS cap series provides flexibility in colour as well as in height. Illumination can either be full (1IS) or dot (1LS). The illuminated caps are mounted on Multimec 5G switch, solid colour caps can be mounted on both 5 series switches.

1JS MEC

Low round cap for foil overlay

1JS cap series is just 10.4 mm high with the Multimec 5G switch making it the lowest illuminated cap in MEC product range. the 1JS is Ø9,6mm. The cap is excellent for foil overlay. It was designed with soft edges in order to extend the lifetime of the foil.

1DS/1ES/1FS MEC

Ø9.6 mm round caps

1DS/1ES/1FS cap series consists of round caps with Ø9,6 mm and overall height with the 5G switch is 14,9mm. 1DS can be provided in solid as well as transparent colour for illumination. 1ES is a cap in solid colour with a small round lens and 1FS is also a cap in solid colour but has a large round lens on the top.

1,2,3